National Repository of Grey Literature 8 records found  Search took 0.00 seconds. 
The influence of zinc oxide on the cement composite with silica fume.
Dobiáš, Jiří ; Koutný, Ondřej (referee) ; Šiler, Pavel (advisor)
The aim of this work was to investigate the influence of zinc oxide on the properties of blended Portland cement mixed with silica fume. On the pastes were monitored flow properties and by using of isoperibolic calorimetry process of the hydration. On the prepared samples were studied mechanical properties of obtaining values of compressive and flexural strength after 1, 7 and 28 days. By using of XRD were measured phase composition and microstructure development war observed by SEM. The elemental composition of cement leaches was measured by using of ICP-OES.
The Study of Aditives and Admixture Influence on High-Performance Concrete Properties
Šiler, Pavel ; Bílek, Vlastimil (referee) ; Brandštetr, Jiří (referee) ; Havlica, Jaromír (advisor)
The aim of this work was to develop the method for the determination of the superperplasticizers (SP) content in the water solution. The method developed was then applied to study the SP adsorption on the individual components used for high-performance concrete and the influence of the temperature and pH values over this adsorption. Furthermore the influence of the water to binder ratio, SP, finely grounded granulated blast furnace slag, fly ash, silica fume, finely ground silica sand and bauxite on the hydration process was studied by means of isoperibolic, isothermal and solution calorimetry. The compressive and flexural strength of most samples used in calorimetric experiments was also determined.
Effect of chemical additives on the process hydration temperature of cement pastes
Knotová, Kateřina ; Halas, Vladimír (referee) ; Sedlmajer, Martin (advisor)
Chemical additives, especially plasticizers and super plasticizers, are necessary components of nearly every concrete. These additives improve the workability of grout and concrete mixes thereby reducing vibration intensity during process of compaction. Advantages of these additives are associated with reduction of the amount of gauging water which leads to decrease water-cement ratio, increase strength and durability of concrete, eventually improve other attributes. The aim of this thesis is to observe the effect of plasticizers and their dosage on the rheology and development of hydration temperatures in simpler systems, which are the cement pastes. The thesis also considers compressive, tensile and flexural strength of concrete.
Influence of Ambient Temperature Conditions on Course of Solidification of Cement Stone
Kolaja, Filip ; Kulísek, Karel (referee) ; Fridrichová, Marcela (advisor)
Bachelor thesis in theoretical part deals with raw material, chemical and mineralogical structure of portland cement. With technology of his production, basics clinker minerals and his hydration. There is indicated also partitioning of cements. In experimental part is observed influence of extremely low and high temperature to the course of hydration of cement stone in compare with reference sample, hydrated at normal temperature conditions.
Influence of Ambient Temperature Conditions on Course of Solidification of Cement Stone
Kolaja, Filip ; Kulísek, Karel (referee) ; Fridrichová, Marcela (advisor)
Bachelor thesis in theoretical part deals with raw material, chemical and mineralogical structure of portland cement. With technology of his production, basics clinker minerals and his hydration. There is indicated also partitioning of cements. In experimental part is observed influence of extremely low and high temperature to the course of hydration of cement stone in compare with reference sample, hydrated at normal temperature conditions.
Effect of chemical additives on the process hydration temperature of cement pastes
Knotová, Kateřina ; Halas, Vladimír (referee) ; Sedlmajer, Martin (advisor)
Chemical additives, especially plasticizers and super plasticizers, are necessary components of nearly every concrete. These additives improve the workability of grout and concrete mixes thereby reducing vibration intensity during process of compaction. Advantages of these additives are associated with reduction of the amount of gauging water which leads to decrease water-cement ratio, increase strength and durability of concrete, eventually improve other attributes. The aim of this thesis is to observe the effect of plasticizers and their dosage on the rheology and development of hydration temperatures in simpler systems, which are the cement pastes. The thesis also considers compressive, tensile and flexural strength of concrete.
The influence of zinc oxide on the cement composite with silica fume.
Dobiáš, Jiří ; Koutný, Ondřej (referee) ; Šiler, Pavel (advisor)
The aim of this work was to investigate the influence of zinc oxide on the properties of blended Portland cement mixed with silica fume. On the pastes were monitored flow properties and by using of isoperibolic calorimetry process of the hydration. On the prepared samples were studied mechanical properties of obtaining values of compressive and flexural strength after 1, 7 and 28 days. By using of XRD were measured phase composition and microstructure development war observed by SEM. The elemental composition of cement leaches was measured by using of ICP-OES.
The Study of Aditives and Admixture Influence on High-Performance Concrete Properties
Šiler, Pavel ; Bílek, Vlastimil (referee) ; Brandštetr, Jiří (referee) ; Havlica, Jaromír (advisor)
The aim of this work was to develop the method for the determination of the superperplasticizers (SP) content in the water solution. The method developed was then applied to study the SP adsorption on the individual components used for high-performance concrete and the influence of the temperature and pH values over this adsorption. Furthermore the influence of the water to binder ratio, SP, finely grounded granulated blast furnace slag, fly ash, silica fume, finely ground silica sand and bauxite on the hydration process was studied by means of isoperibolic, isothermal and solution calorimetry. The compressive and flexural strength of most samples used in calorimetric experiments was also determined.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.